Arris IPC4100 - Ethernet Hardware Configuration

Chapter 10:
STANDARD 365-095-33577 Revision x.1 IPC4100 Release 1.0 Installation and Operation Guide
70
Ethernet Hardware Configuration
Table 21. Connected Home – Ethernet Hardware Configuration Fields
Field Description
Ethernet MAC Address MAC Address used for the Ethernet connection.
Driver Loaded This parameter indicates whether the Ethernet driver
is loaded. Possible values:
True = Loaded
False = Not loaded
Flow Control This parameter indicates whether flow control has
been enabled. Possible values:
True = Enabled
False = Disabled
Jumbo Packet This parameter indicates whether Jumbo packets
have been enabled. Possible values:
True = Enabled
False = Disabled
Link Speed The link speed expressed in Mbps. Possible values: 10,
100 and 1000
Link Duplex
This parameter indicates whether Duplex mode is
enabled (after auto negotiation) for the link. Possible
values:
True = Enabled
False = Disabled