Arris IPC4100 - Moca Power and Attenuation Level

Chapter 10:
STANDARD 365-095-33577 Revision x.1 IPC4100 Release 1.0 Installation and Operation Guide
66
Field Description
MoCA version Indicates the MoCA version associated with each
MoCA device detected on the corresponding node.
Tx Phy Rate The physical layer transmit rate of the STB being
polled to the connected node (indicated by node ID),
expressed in Mbps.
Rx Phy Rate
The physical layer receive rate by the STB being
polled from the connected node (indicated by node
ID), expressed in Mbps.
MoCA Power and Attenuation Level
Table 18. Connected Home – MoCA power and attenuation level fields
Field Description
MoCA Power and
Attenuation Level Table
Table of the Attenuation and Power associated
with each node in the MoCA network
Tx Attenuation Level MoCA transmit attenuation level (dB) for each
direct link between the local device and each
MoCA node on the MoCA network, if available.
MoCA Tx Power The RF transmit power level at the connected
MoCA node expressed in dBm for the link between
the connected node and the STB being polled.
MoCA Rx Power
The RF receive power level at the STB being polled
expressed in dBm for the link between the