Chapter 1:
STANDARD 365-095-33577 Revision x.1 IPC4100 Release 1.0 Installation and Operation Guide
6
During installation
Do not place the IPC4100 in an enclosed area where the cooling vents are blocked or
impede the flow of air through the ventilation openings.
Install the IPC4100 so that its position does not interfere with its proper ventilation. For
example, do not place the IPC4100 on a bed, sofa, rug, or similar surface that could block
the ventilation openings.
Install the IPC4100 away from heat sources such as radiators, heat registers and stoves.
Installation of the IPC4100 near consumer electronics devices, such as stereo
receiver/amplifiers and televisions, is permitted as long as the air surrounding the
IPC4100 does not exceed 40º C (104º F).
Place the IPC4100 on a flat surface not prone to vibration or impact.
Do not install the IPC4100 in an area where condensation occurs.
To prevent the temporary loss of guide data and cause a temporarily non-responding
IPC4100, do not plug the AC power cord into a switched power outlet.
To avoid shock and vibration damage to internal components do not move the IPC4100
while it is plugged in.
To Next Page
Loading...
