Chapter 10:
STANDARD 365-095-33577 Revision x.1 IPC4100 Release 1.0 Installation and Operation Guide
78
Field Description
maximum value displayed is 9999, even if there were
more than 9999 errors.
Table 26. In Band Status Fields (Page 2)
Field Description
5 Second Error Counts Indicates the number of correctable and
uncorrectable digital multiplex errors. It is updated
every 5 seconds and reset each time the Product is
power cycled or another digital multiplex is tuned.
The maximum value displayed is 9999, even if there
were more than 9999 errors.
Long Term Error Counts Indicates the number of correctable and
uncorrectable digital multiplex errors in the digital
multiplex either since the last tune or over the last 24
hours.
Error Rates Indicates the estimated error rates for Uncorrectable
Blocks and Correctable Bits. Rates are displayed as a
cumulative calculated value from either the last tune
or over the last 10 minutes, whichever interval is
shorter.
To Next Page
Loading...
