Arturia Spark 2 - Registration and Authorization; Registration Process

ARTURIA – SPARK CREATIVE DRUM MACHINE – USER’S MANUAL
11
2 REGISTRATION & AUTHORIZATION
Once Spark is installed, the next step is to register the software in order to
obtain the activation code that will enable you to use it.
The registration process will require you to enter the serial number and the
unlock code you received with the product.
In order to proceed, go to this web page and follow the instructions:
http://www.arturia.com/register
Note: If you don’t have an Arturia account yet, you will need to create one. The
process is quick, but it does require that you can access your e-mail address
during the registration process.
Once you have acquired an Arturia account you will be able to register the product.