Arturia Spark 2 - External MIDI Controller Configuration

ARTURIA – SPARK CREATIVE DRUM MACHINE – USER’S MANUAL
95
6.7 CONTROLLING SPARK WITH AN EXTERNAL MIDI
CONTROLLER
6.7.1 Assign a MIDI note to pads
Click holding [Cmd] on Mac / [Ctrl] on Windows on [Pads] #115 to #122 and press a
button or key on your MIDI controller.
6.7.2 Assign a MIDI note to bank buttons
Same as previous on corresponding button/pad.
6.7.3 Assign a MIDI note to pattern buttons
Same as previous on corresponding button/pad.
6.7.4 Assign a MIDI note to loop on button
Same as previous on corresponding button/pad.
6.7.5 Assign a MIDI CC to Loop divide knob
Click holding [Cmd] on Mac / [Ctrl] Win on [Loop] #49 and move knob or fader on your
MIDI controller.
6.7.6 Assign a MIDI CC to Loop Move knob
Same as previous on corresponding knob.
6.7.7 Assign a MIDI CC to shuffle knob
Same as previous on corresponding knob.
6.7.8 Assign a MIDI CC to master Volume knob
Same as previous on corresponding knob.
6.7.9 Assign a MIDI CC to cutoff/res/Pan/Aux1/Aux2/Volume knobs
Same as previous on corresponding knob.
6.7.10 Assign a MIDI CC to instrument parameters knobs
Same as previous on corresponding knob.
6.7.11 Assign a MIDI CC to tempo knob
Same as previous on corresponding knob.
6.7.12 Assign a MIDI CC to stop and play functions using Cmd+Click
Same as previous on play and stop buttons.