Reverb parameters
The Reverb is only available for Aux and Master tracks
A reverb emulates the reflections of a sound in a different space (room, hall, etc). The
material section (HF Dampening and brightness) sets the timber for the reverb (dark or
bright sounding). The shape section (Diffusion and Decay time) sets the size and
duration of the reverb. The pre-delay section (Feedback and Delay) adds a small delay to
the reverb to emulate early reflections.
Destroyer parameters
A Destroyer is a digitizer effect which produces a distortion by the reduction of the
resolution or bandwidth of digital audio data. The resulting bit reduction may produce a
“warmer” sound impression, or a harsh one, depending on the amount of bit reducer and
resampler. Harmonic distortion adds overtones that are whole number multiples of a
sound wave's frequencies.
To Next Page
Loading...