move your mouse up or down to change the parameter. The Digital display window in
the center of the main panel shows you the changes applied to the selected parameter in
real time.
These motion parameters can be recorded as automations into the pattern and edited
later accurately using the automation editor (see section 5.4.2.2).
Right-click on a Filter or Mixer knob to edit or disable its Motion.
• Cutoff: Set Filter cutoff on current instrument
• Resonance: Set Filter resonance on current instrument.
• Aux1/Aux2: Set Aux1 or Aux2 amount on current instrument.
• Pan: Set amount of Pan on current Instrument
• Volume: Set the volume on current Instrument
To Next Page
Loading...