EasyManuals Logo

ASTEC RT360 User Manual

Default Icon
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
WHEELS/TIRES
AU103170 H5B 44
Tire or Rim Service
Always have a qualified tire technician service the tires
and rims for this machine. It is recommended that you
have this technician inflate the tires. To prevent accidents,
use a restraining device (tire inflation cage), correct
equipment and correct procedure. Explosive separation of
the tire (single piece rim) or the tire and/or rim parts
(multi-piece rim) can cause serious injury or death.
Wheel Nut Torque
Use the sequence shown below in the illustration and
tighten the wheel nuts to a torque of 81 to 85 Nm (60 to
70 lb ft).
NOTE:
New machines must have the torque for the wheel
nuts checked after the first 10 hours of operation and
every 10 hours thereafter until the wheel nuts stay tight
.
860352
WARNING
: A tire can explode during inflation
and cause serious injury or death. Never
increase air pressure beyond 35 PSI to seat the
bead on the rim. Replace a tire if it has a defect.
Replace a wheel rim which has cracks, wear or
severe rust. Make sure that all the air is removed
from a tire before removing the tire from the
rim. Never use force on an inflated or partially
inflated tire. Make sure the tire is correctly
seated before inflating.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ASTEC RT360 and is the answer not in the manual?

ASTEC RT360 Specifications

General IconGeneral
BrandASTEC
ModelRT360
CategoryLawn and Garden Equipment
LanguageEnglish

Related product manuals