INSTRUMENTS/CONTROLS
15 AU103168 C7B
SEAT BELT
B901048
When the machine is equipped with a ROPS, wear the
Seat Belt during machine operation.
NOTE:
The illustrations that follow show the correct
procedure to fasten and release the belt.
BP98J021
1. Fasten the belt end into the left-hand buckle.
BP98J022
2. To release the seat belt, push the button on the
buckle.
IMPORTANT:
Make sure the belt end and buckle are
securely fastened.
WARNING:
You are protected by the ROPS
system (Roll Over Protective Structure). The seat
belt is an important part of the ROPS system.
Before you operate this machine, always fasten
the seat belt. If the machine rolls over and you
DO NOT have the seat belt fastened, you can be
crushed by the ROPS or the machine.
WARNING:
Securely fasten your seat belt. Your
machine is equipped with a ROPS cab, ROPS
canopy or ROPS frame for your protection. The
seat belt can help insure your safety if it is used
and maintained. Never wear a seat belt loosely or
with slack in the belt system. Never wear the belt
in a twisted condition or pinched between the seat
structural members.
To Next Page
Loading...
Need help?
General
