27 AU103168 C7B
LUBRICATION
GENERAL SAFETY BEFORE
SERVICING MACHINE
Read the safety decals and information decals on the
machine. Read the operator’s manual. Understand the
operation of the machine before you start servicing.
B801147T
PIC00056
Before you service the machine, put a Do Not Operate
tag on the control panel. This tag, Astec part number
AU103157 is available from your dealer. The Do Not
Operate tag is included with your machine.
Use the correct safety clothing and safety equipment.
Understand how to use a fire extinguisher and first aid kit.
BE ALERT! Know where to get assistance. Know how to
use a first aid kit.
BE AWARE! Take advantage of training programs offered.
Do not service this equipment without proper training.
PLASTIC AND RESIN PARTS
Avoid using gasoline, kerosene, paint thinner, etc., when
cleaning plastic windows, console, instrument cluster,
monitor, gauges, etc. Use ONLY water, mild soap and a
soft cloth when you clean these parts.
Using gasoline, kerosene, thinner, etc., will cause
discoloration, cracking or deformation of the part being
cleaned.
ENVIRONMENT
Before you service this machine and before you dispose of
the old fluids or lubricants always remember the
environment. DO NOT put oil or fluids into the ground or
into containers that can leak.
Check with your local environment or recycling center or
your dealer for correct disposal information.
ENGINE HOURMETER/TACHOMETER
When the engine is running, this gauge will show the
engine speed (RPM). When the engine is stopped, this
gauge will indicate the number of actual whole hours the
engine has run. Use the engine hourmeter along with the
Lubrication/Maintenance Chart in this manual to service
your machine at the correct time periods.
NOTE:
This gauge contains a non-replaceable battery.
Dispose of the gauge in a responsible manner upon
replacement
.
BD01F327
WARNING:
Improper service or repair can
cause injury or death. If you do not understand
the service procedures for this machine, see your
dealer or the service manual for this machine.
WARNING:
Raised equipment on the machine
without an operator can cause injury or death.
Before you leave the machine, always support or
lower the equipment (trencher boom, etc.) to the
ground and stop the engine.
WARNING:
Replace all covers or guards after
servicing or cleaning the machine. NEVER operate
the machine with covers or guards removed.
To Next Page
Loading...