11
(2-2) Rear section (Fig. 4-4)
①Power key
Press to turn on the calculation display section.
②Alarm output terminal
Use to handle alarm signals.
③RS-232C output terminal
Use to connect the calculation display section to a personal computer.
④Recorder output terminal
Use to connect the calculation display section to a recorder.
⑤Detection section - display section connection terminal:
Connect the DS-2 cable to this terminal.
⑥Power cable
Insert into a 100V AC to 240V AC outlet.
Calculation display section rear view
Fig. 4-4
To Next Page
Loading...
Need help?
General
