ATAGO PRM-100a - Page 42

40
(4-5) Preparing PRM-100αfor Data Reception
①Select "4. Conc" on the SET UP mode, using the
↑ ↓ keys (Fig. 11-20).
Fig. 11-19
②Press the ENTER key to confirm the selection.
The screen is ready for Conc1 to 5.
(Fig. 11-20).
Fig. 11-20
③Press the ENTER key to confirm the selection.
The screen is ready for Conc input.
"dAtA" appears on the measurement result display
(Fig. 11-21).
※Press the SCALE key to return to the previous "
Conc1" screen.
Fig. 11-21
4. Conc
SCALE Key
ENTER Key
↑ ↓ Keys
↑ ↓ Keys
↑ ↓ Keys
↑ ↓ Keys
Conc1
⇔
Conc2
⇔
Conc3
⇔
Conc4
⇔
Conc5
ENTER Key
dAtA1
dAtA2
dAtA3
dAtA4
dAtA5
Ready for Conc input.
Transfer completed （Cansel ： SCALE Key）
dAtA1
Conc1