3
Handling of this instrument
◇When measuring a substance harmful to the
human body, be aware of its properties and
wear protective gloves, mask, etc.
◇If the instrument begins to smell abnormally,
overheat, or emit smoke, turn off the power
switch and disconnect the power plug
immediately.
Fire or malfunction may result if the instrument is
continued to be used.
Ask your ATAGO distributor for an inspection.
◇Do not attempt to repair, modify, or disassemble
the instrument yourself.
Improper servicing may result in fire, electrical
shock, or burns.
◇If the instrument is dropped or is subjected to a
strong shock, have it inspected by an ATAGO
distributor.
Fire or malfunction may result if the instrument is
used.
◇ Keep the detection section except for the
wetted sensor part away from water.
Do not operate the instrument while the
connecting ports of the display section is wet.
(The instrument is protected against
submersion in water, it may not be operated
submerged in water.)
Do not place the display section in places that
are frequently wet or have constant exposure to
water.
◇If this instrument is used to measure very hot or
highly acidic samples, the prism may be
damaged resulting in inaccurate measurements.
To Next Page
Loading...
