5
Handling of plug
◇Do not insert the power plug in an outlet other
than AC100 to 240V.
Inserting the power plug in any other outlet may
result in short circuiting the unit, smoking or fire.
◇Do not use the power cable and plug if damaged
or broken.
If used, fire, electrical shock, or burns may result.
For a new power cable and plug, contact your
ATAGO distributor.
◇Do not insert or disconnect the power plug with
wet hands.
◇ Be sure to hold and pull the plug when
disconnecting the power cable from the outlet.
If the cable is pulled improperly, the plug may be
broken, and may result in fire or electrical shock.
◇Ensure the grounding pin is properly connected
when connecting the power cable to an AC
outlet.
◇The disconnecting device of the main unit is the
power cable.
Make sure that there is no obstacle in vicinity of
the plug.
Connecting Compontents
◇Turn off the power switch and unplug the unit
from the AC outlet before connecting the
individual components with connecting cables.
Connecting components while the unit power is
on increases the likelihood of electrical shock.
To Next Page
Loading...
Need help?
General
