Atal AT 505 - Installation of the Remote Control Receiver

Chap. III - Remote control
Gas-manual-en.docx — 43 —
Fig.
79 – After you have clicked on “Remove" and confirmed your
choice, the removal of the program will start
Fig.
80 – To proceed with removal confirm that you really wish to
remove the program
Fig.
81 – Removal may take several seconds. Click on “Finish” to complete removal
2.3 INSTALLATION OF THE REMOTE CONTROL RECEIVER
The RC
receiver enables communication between the
analyser station
PC
and the RC.
Fig.
82 – Remote control receiver