Special Characters with Auto Dial and Speed Dial
You can program the following special instructions in an outside Auto Dial button or
Speed Dial Number:
●
●
●
●
Touch
Hold
(pause).
The system will pause for 1.5
seconds. This allows for
connection with a PBX or
computer-based service.
Touch
Drop
(stop).
The system will stop until it is
reactivated. This allows for
connection with a computer-based
service.
Touch
Recall
and then
Hold
The system puts a switchhook
(switchhook flash).
flash at the beginning of an Auto
Dial sequence. This initiates a
Centrex/PBX feature.
Touch
Transfer
(switch to Touch-
If you have rotary phone lines, the
Tone pulse).
system switches to Touch-Tone
pulses. This allows your phone to
“talk” with a computer-based
service.
47
To Next Page
Loading...
