Intercom Auto Dial
Although you can dial an intercom number by pressing Intercom and then touching
the 2-digit intercom number, you may want to program Intercom Auto Dial Numbers
of people you often speak with in your office.
A major benefit of an Intercom Auto Dial button is that it also allows you to verify
whether that person is on the phone. If s/he is on the phone, the green light next to
the Auto Dial button will be on.
To
program an Intercom Auto Dial Number:
Action
Result
Label the button you want to
program with the person’s name or
intercom number.
Joan
Slide the T/P switch to P.
You’ll hear a ringing pattern. The
red line light(s) come on and the
green line light(s) flash.
Touch the button you Iabelled.
Touch * and then 91.
1.
2.
3.
4.
5.
6.
7.
Enter the number you want to
The number is saved in that
save.
button.
For example, to save intercom
number 18, you would touch:
*9118
Repeat steps 1 and 3-5 for each
intercom number you want to save.
Slide the T/P switch to the center
position.
Note:
You can’t program an
Auto Intercom
and a
Manual Signal
button for the
same person—one cancels the other.
42
To Next Page
Loading...
