AT&T MERLIN Plus Training Manual

RING OPTION OVERRIDE
You can set your phone so it:
● Rings for all outside calls.
● Rings for no outside calls (no ring).
● Or, has a delayed ring.
If you’ve set the phone for no ring or delayed ring, you may find that at times you’ll
need to change it back so it rings. For example, if you are the regular back-up
person for the Attendant when s/he is away from the phone, you will need to set
your phone so it rings.
If you regularly need to change the phone so it rings, you can program an “over-
ride” button to switch your phone to ring immediately.
To program a ring override button:
Action
Result
Label a button “Override.”
Override
Slide the T/P switch to P.
You’ll hear a ringing pattern. The
red line light(s) come on and the
green line light(s) flash.
1.
2.
3.
4.
5.
1.
2.
Touch the button you Iabelled.
Touch * and then 78.
The button is programmed.
Slide the T/P switch to the center
position.
To use ring override:
Action
Result
Touch the Override button. All If the button has lights, the green
calls will ring at your phone.
light comes on.
To
cancel using ring override:
Touch the Override button. The
The green light goes off.
original ringing pattern—either no
ring or delayed ring—returns.
55

AT&T MERLIN Plus Specifications

General

Brand	AT&T
Model	MERLIN Plus
Category	Conference System
Language	English