AT&T MERLIN Plus - Paging through the Loudspeaker (Loudspeaker Page)

PAGING THROUGH THE LOUDSPEAKER (LOUDSPEAKER PAGE)
The Loudspeaker Page feature enables you to make an announcement over your
company’s existing loudspeaker equipment. This feature is particularly useful if
your company has a warehouse, shop, or assembly area where people don’t have
access to individual phones. The feature is also a big help when an Attendant is
trying to locate someone who is away from his/her desk.
To
program a loudspeaker page button:
Action Result
Label a button “Page.”
Page
Slide the T/P switch to P. You’ll hear a ringing pattern. The
red line lights come on and the
green line lights flash.
Touch the button you Iabelled.
Touch * 91 and then 6. The button is programmed.
1.
2.
3.
4.
5.
1.
2.
3.
4.
Slide the T/P switch to the center
position.
To use the loudspeaker page feature:
Action
Result
Lift the handset.
The red light for the next available
Or,
phone line comes on.
Touch the Intercom button, and
The red intercom light comes on.
then touch 6.
Touch the
Page button.
The loudspeaker turns on.
You’ll hear a beep.
Make your announcement.
The announcement is heard
through the loudspeaker.
Hang up.
The loudspeaker is disconnected.
72