To
use an Intercom Auto Dial Number:
Action
Result
1.
2.
Touch the
Intercom Auto Dial
The Speaker goes on and you
button.
hear a beep.
When you hear the person answer,
The green light next to the
lift the handset and conduct your
Intercom Auto Dial button also
conversation.
comes on.
If the line is busy or no one
answers—touch
Speaker
to
cancel the call.
NOW YOU TRY IT!
Intercom Auto Dial
If you have an available button, program the Attendant's Intercom Number.
(The Attendant phone is always “10.”)
Touch the button to call the Attendant.
When the Attendant answers, you know you've programmed the correct
number. If someone else answered, you probably programmed a different
Intercom Number. Review the procedures on page 42 and then try again.
1.
2.
43
To Next Page
Loading...
