AT&T TL86109 - Review the Speed Dial Directory; Dial a Speed Dial Entry; Reassign a Speed Dial Entry

106
Directory
Speed dial directory
Review the speed dial directory
Using a cordless handset:
Press the MENU softkey when the handset is not in use.
Press or to select DIRECTORY and then press the SELECT softkey.
Press or to select Speed dial, then press the SELECT softkey.
Press or to browse.
Using the telephone base:
Press the MENU softkey when the telephone base is not in use.
Press DIR, CID, /DELETE or /REC to select Directory and then press
the SELECT softkey.
Press DIR, CID, /DELETE or /REC to select Speed dial, then press
the SELECT softkey.
Press DIR, CID, /DELETE or /REC to browse.
Dial a speed dial entry
Using a cordless handset:
Press and hold an assigned number to display the desired speed dial entry.
Press 1 LINE/FLASH, 2 LINE/FLASH or /SPEAKER to make a line 1 or
line 2 call. Press CELL to make a cell call.
Using the telephone base:
Press and hold an assigned number to display the desired speed dial entry.
Press 1 LINE, 2 LINE or SPEAKER or lift the corded handset to make a
line 1 or line 2 call. Press CELLULAR to make a cell call.
Reassign a speed dial entry
Using a cordless handset:
Press the MENU softkey to enter the main menu in idle mode.
Press or to highlight DIRECTORY and then press the SELECT softkey.
Press or to highlight Speed dial and then press the SELECT softkey.
Press or to highlight a desired speed dial slot and then press the
ASSIGN softkey.
Press or to scroll to a desired directory entry and then press the
ASSIGN softkey. The handset displays Directory A replaces Directory B
Accept?
Press the YES softkey to confirm and you hear a confirmation tone.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
1.
2.
1.
2.
3.
4.
5.
6.