AT&T TL86109 - Ringer Tone; LCD Language

42
Telephone settings
Telephone base settings
Ringer tone
You can select the ringer tones for incoming calls on line 1, line 2 and the
cell line.
To select a ringer tone:
Press the MENU softkey on the telephone base in idle
mode to enter the main menu.
Press DIR, CID, /DELETE or /REC to highlight
Ringers, then press the SELECT softkey.
Press DIR, CID, /DELETE or /REC to highlight
Ringer tone, then press the SELECT softkey.
Press DIR, CID, /DELETE or /REC to select
All lines, Line 1, Line 2, Cell A or Cell B, then press
the SELECT softkey to confirm.
Press DIR, CID, /DELETE or /REC to select a
ringer tone. A sample of each ringer tone plays as you
scroll through the choices.
Press the SET softkey to confirm. You hear a confirmation tone.
NOTE: If you turn off the ringer volume, you do not hear ringer tone samples.
LCD language
You can select English, Français or Español to be used for all screen displays.
To select a language:
Press the MENU softkey on the telephone base in idle
mode to enter the main menu.
Press DIR, CID, /DELETE or /REC to highlight
Settings, then press the SELECT softkey.
Press the SELECT softkey to select LCD language.
Press DIR, CID, /DELETE or /REC to choose
English, Français or Español, then press the SET
softkey. You hear a confirmation tone.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
SETTINGS
LCD language
Line preference
Display alerts
SELECT
LCD LANGUAGE
English
Fran
c
ais
Espanol
SET
,
RINGERS
Ringer volume
Ringer tone
SELECT
RINGER VOLUME
All lines
Line 1
Line 2
SELECT
RINGER TONE
2
3
4
SET