AT&T TL86109 - Call Transfer and System Expansion

89
Multiple handset use
Call transfer using intercom
Use the intercom feature to transfer an outside call to another system
handset or the telephone base.
To transfer an outside call:
Using a cordless handset:
When on an outside call, press the OPTION softkey.
Press or to highlight Intercom, then press the SELECT softkey.
If you have only one cordless handset, press the SELECT softkey and
the handset displays Calling base. The telephone base rings and
displays Handset is calling.
If you have two or more cordless handsets, your handset displays
INTERCOM TO:
Press the SELECT softkey to select BASE.
-OR-
Press 0 for BASE and then press the
SELECT softkey.
Your handset displays Calling base. The telephone
base rings and displays Handset X is calling.
-OR-
Press or to choose a destination handset, then
press the SELECT softkey.
-OR-
Press 1-9 for HANDSET 1-9, *0 for HANDSET 10, *1
for HANDSET 11 or *2 for HANDSET 12, and then press the SELECT
softkey to initiate an intercom call.
Your handset displays Calling handset X and the destination handset
rings and displays Handset X is calling.
To answer the call on the other handset, press 1 LINE /FLASH,
2 LINE /FLASH or /SPEAKER. The outside call is still on hold and both
handsets now show Intercom. You can now have a private conversation
between the system handsets.
-OR-
To answer the call on the telephone base, press 1 LINE, 2 LINE or
SPEAKER . The outside call is still on hold and both the handset
and telephone base now show Intercom. You can now have a private
conversation between the telephone base and the handset.
1.
2.
•
•
–
–
3.
INTERCOM TO:
BASE
HANDSET 2
HANDSET 3
BACK SELECT
Intercom
Directory
Call log
BACK SELECT