AT&T TL86109 - Add a Device on the Active Devices List

25
Bluetooth
Bluetooth setup
Add a device on the active devices list
You can have a maximum of two devices on the active devices list.
To add an active device:
Press the MENU softkey on the telephone base in idle
mode to enter the main menu.
Press DIR, CID, /DELETE or /REC to highlight
Bluetooth, then press the SELECT softkey.
Press DIR, CID, /DELETE or /REC to highlight
Active devices, then press the SELECT softkey.
Press DIR, CID, /DELETE or /REC to highlight an
empty slot, then press the ADD softkey.
You are prompted to select a device from the paired
devices list.
Press DIR, CID, /DELETE or /REC to select
a paired device, then press the ADD softkey. The
telephone base displays Device added to active list.
1.
2.
3.
4.
5.
6.
PAIRED DEVICES
Cell phone B
Cell phone C
Cell phone D
INFO ADD
ACTIVE DEVICES
A Cell phone A
B <empty>
ADD
Answering sys
Directory
Call log
Bluetooth
SELECT
BLUETOOTH
Add cellular
Add headset
Active devices
SELECT