AT&T TL86109 - Delete a Redial Entry

82
Telephone operation
Redial
Using the telephone base:
Press REDIAL in idle mode.
Press DIR, CID, /DELETE or /REC to browse until the desired
number displays.
Press the SAVE softkey.
The telephone base displays ENTER NUMBER. Use the dialing keys to edit
the number, if necessary.
Press CANCEL to erase a digit.
Press DIR or /SKIP to move the cursor to the right. Press CID or
/REPEAT to move to the left.
Press the PAUSE softkey to insert a dialing pause (a p appears).
Press the NEXT softkey.
The handset displays SELECT TYPES. Press DIR, CID, /DELETE or
/REC to select one of the following types:
Home
Cell
Work
Other
Press the NEXT softkey. The telephone base displays ENTER NAME. Use
the dialing keys (page 95) to enter a name.
Press CANCEL to erase a character.
Press DIR or /SKIP to move the cursor to the right. Press CID or
/REPEAT to move to the left.
Press the SAVE softkey to confirm and you hear a confirmation tone.
Delete a redial entry
Using a cordless handset:
Press REDIAL/PAUSE when the handset is not in use.
Press or to browse until the desired number displays.
Press the DELETE softkey to delete the displayed number.
Using the telephone base:
Press REDIAL when the telephone base is not in use.
Press DIR, CID, /DELETE or /REC to browse until the desired
number displays.
Press the DELETE softkey to delete the displayed number.
1.
2.
3.
4.
•
•
•
5.
6.
•
•
•
•
7.
•
•
8.
1.
2.
3.
1.
2.
3.