AT&T TL86109 - Chain Dialing

78
Telephone operation
Options while on calls
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, call log or redial list.
To access a number in the directory while on a call:
Using a cordless handset:
Press the OPTION softkey.
Press or to highlight Directory, then press the SELECT softkey.
If there are more than one directory, press or to highlight the desired
directory, then press the SELECT softkey.
Press or to scroll to the desired entry or perform an alphabetical
search (page 99).
Press the DIAL softkey to dial the displayed number.
Using the telephone base:
Press the OPTION softkey.
Press DIR, CID, /DELETE or /REC to highlight Directory, then press
the SELECT softkey.
If there are more than one directory, press DIR, CID, /DELETE or
/REC to highlight the desired directory, then press the SELECT softkey.
Press DIR, CID, /DELETE or /REC to scroll to the desired entry or
perform an alphabetical search (page 99).
Press the DIAL softkey to dial the displayed number.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.