AT&T TL86109 - Page 64

58
Telephone settings
Answering system settings
To delete your announcement:
Using a cordless handset:
Press the MENU softkey on the handset in idle mode to
enter the main menu.
Press or to scroll to ANSWERING SYS, then press
the SELECT softkey.
Press or to choose Mailbox 1 or Mailbox 2, then
press the SELECT softkey .
Press the SELECT softkey to choose Announcement.
Press the SELECT softkey again to choose Annc audio.
Press or to choose Annc A or Annc B, then press
the PLAY softkey .
Press the DELETE softkey while the handset is playing
the announcement.
The handset displays Reset announcement to default?
Press the YES softkey to confirm . You hear a
confirmation tone.
Using the telephone base:
Press the MENU softkey on the telephone base in idle
mode to enter the main menu.
Press DIR, CID, /DELETE or /REC to scroll to
Answering sys, then press the SELECT softkey.
Press DIR, CID, /DELETE or /REC to choose
Mailbox 1 or Mailbox 2, then press the SELECT softkey .
Press the SELECT softkey to choose Announcement.
Press the SELECT softkey again to choose Annc audio.
Press DIR, CID, /DELETE or /REC to choose
Annc A or Annc B, then press the PLAY softkey .
Press the DELETE softkey while the telephone base is
playing the announcement.
The telephone base displays Reset announcement to
default? Press the YES softkey to confirm . You hear a
confirmation tone.
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
5.
6.
7.
8.
Announcement
playback
DELETE STOP
ANSWERING SYS
Mailbox 1
Mailbox 2
SELECT
ANNC AUDIO
Annc A
Annc B
RECORD PLAY
MAILBOX 1
Announcement
Delete all old
Record memo
SELECT
ANSWERING SYS
Mailbox 1
Mailbox 2
BACK SELECT
ANNC AUDIO
Annc A
Annc B
RECORD PLAY
Announcement
playback
DELETE STOP
ANNOUNCEMENT
Annc audio
Annc mode
BACK SELECT
MAILBOX 1
Announcement
Delete all old
Record memo
BACK SELECT