Atlas Copco ACTA 3000 - Page 131

ACTA 4000 User Guide Technical specifications
9836 4171 01 2008-12 131 (136)
Q.prog selection DS/DL RS232 PF3000/PF4000
Manual input
PF3000/PF4000
RS232
PowerMACS
Manual input
PowerMACS
RS232
Parameter 1
Torque Torque Torque Torque Torque
Statistical
parameter 1
Mean, σ
Contr, Diff Contr, Diff Contr, Diff Contr, Diff
Torque units
Read from
controller
Torque units set by
Config.
Read from
controller
Torque units set by
Config.
Read from
controller
Pulse units
Pulse units set by
Config.
Pulse units set by
Config.
Pulse units set by
Config.
Pulse units set by
Config.
Pulse units set by
Config.
Parameter 2
None None (If
transducer has an
angle encoder:
Angle)
None (If
transducer has an
angle encoder:
Angle)
None (If
transducer has an
angle encoder:
Angle)
None (If
transducer has an
angle encoder:
Angle)
Statistical
parameter 2
None None (If
transducer has an
angle encoder:
Contr, Diff)
None (If
transducer has an
angle encoder:
Contr, Diff)
None (If
transducer has an
angle encoder:
Contr, Diff)
None (If
transducer has an
angle encoder:
Contr, Diff)
Comments row 1
Comments row 2
TCT = Transducer Calibration Torque
TTS = Transducer Torque Span