Measurement results ACTA 4000 User Guide
80 (136) 2008-12 9836 4171 01
No Display Description
Bar-code communication.
PowerMACS communication.
3 Name Tool or application name
4 Number of tightening
operations
The number of tightening operation, which have been performed. In ACTA Advanced
Analysis and Quality Control, the batch size is shown inside parenthesis if it is non
zero.
5 Batch size Number of tightenings for a complete measurement, set by the operator. When
completed a signal (three flashes on n x OK LED) is issued.
6 Soft keys The soft key text represents the main menus of current programming tree and is
operated by the 5 buttons located below the display. Each soft key field displays the
functionality of each button.
6.2 The Measurement dialog boxes
There are up to three different measurement dialog boxes depending on ACTA version. The Basic dialog
box is the standard view in ACTA Basic. It is also available in the Quality Control and Advanced Analysis
versions under the
View menu block. The Custom and Trace measurement dialog boxes are available in
ACTA Quality Control and Advanced Analysis only.
The bottom row on each measurement dialog box also displays the head parameters of the programming
tree organized in menu blocks. Each measurement dialog box has its own functionality and therefore its
own programming tree (menu block) setup.
During measurements it is possible to switch between the Basic,
Custom and Trace dialog boxes at any time.
To Next Page
Loading...
