ACTA 4000 User Guide System overview
9836 4171 01 2008-12 7 (136)
1 System overview
Introducing ACTA, combining tightening analysis functionality with integrated tools management and
statistic process control (SPC).
This user guide describes the ACTA 4000 and ACTA 3000, revision 3.x functionality. When referring to
ACTA only, the functionality is valid for both versions. Other versions of ACTA are not covered in this
user guide.
1.1 ACTA functionality
ACTA is available in three different versions to cover all needs:
Basic
Quality Control (QC)
Advanced Analysis (AA).
The following functionality is available in all versions of ACTA:
Function ACTA 4000 ACTA 3000
PC connection allowing quick upgrades and PC
integration through ToolsTalk QAT
USB, RS 232 and Ethernet RS 232
Printer Port Not available, printing capability
through Report Viewer
application (not yet implemented)
Yes
Analogue output for quality analysis with oscilloscope Yes Yes
An integrated battery 7 hours 3,5 hours
Automatic communication of calibration data from
transducers at start-up
Strain-gage and amplified
transducers supported
Strain-gage transducers
supported
Display Color display Black and white display
Quick programming function for simple torque checks Yes Yes
Flash memory for easy upgrading Yes Yes
Memory 6000 tools, 48000 tool tightening
operations
500 tools, 6000 tool
tightening operations
ToolsTalk QAT-compatible Yes Yes
To Next Page
Loading...
Need help?
General
