ACTA 4000 User Guide Interface
9836 4171 01 2008-12 15 (136)
When all data in the dialog box is correctly filled in, do one of the following:
Highlight
OK on the display and press ENTER to confirm and exit the dialog box
Press
OK on the numeric keypad to confirm and exit the dialog box
To exit a dialog box without making any changes, do one of the following:
Highlight
Cancel in the display and press ENTER
Press the
Cancel soft key
The changes are discarded and the
Measurement (or other default) dialog box is displayed again.
Navigating in the dialog boxes
The Next and Prev. choices, when present, let you navigate to the next dialog box in the current pull-up
menu without returning to the
Measurement dialog box. When leaving the dialog box using Next or Prev.,
ACTA asks if you want the changes to be saved or not.
To Next Page
Loading...
