Programming ACTA ACTA 4000 User Guide
28 (136) 2008-12 9836 4171 01
8 Database
Select submenu:
1 All tools rundowns
Prints all tightening operations for all tools.
2 All tools setup
Prints the setup for all tools.
3 All tools statistics
Prints statistics for all tools.
4 All tools calibration
Prints a calibration report for all tools. A tool
calibration should have been performed for all
tools prior to the printout.
5 Database summary
Prints a summary of all tools.
9 Trace
Prints a trace of the last tightening operation. For ACTA 4000,
ToolsTalk QAT must be used for printing traces.
To terminate a printout in progress, press menu block
Abort.
See section Port for print settings, and section Printouts from ACTA for examples of the printout reports.
To Next Page
Loading...
