Atlas Copco PNS 1250 Cud S3A/T3 APP - Page 108

- 111 -
NOTES
Note 1 and 4 need to be from the same supplier and
the same as on 1626991900 and 1626992100.
Note 1: Connector: Amphenol PT06 A 22-41 S SR
Terminals: Size 16 (large): Amphenol
800 635
Size 20 (small): Amphenol
800 615
Unused cavities shall be sealed with:
Amphenol 900 021 or 900 020
OR
Connector: Deutsch HD 36 - 24-19 SN -
059
Terminals: Size 12 (large): Deutsch
0462-203-12141
Size 16 (small): Deutsch
0462-201-16141
Unused cavities to be sealed with:
Deutsch 114017
Wiring braided until connector, and
attached to strain relief with nylon strap.
Note 2: Connector: Deutsch DTM 06-2S
Terminals: Deutsch 1062-20-0122
Secondary Lock:
Deutsch WM2S
Note 3: Connector: Deutsch DT 06-2S
Terminals: Deutsch 0460-201-16141
Secondary Lock:
Deutsch W2S
Note 4: Connector: Amphenol PT07 A 22-41 P SR
Terminals: Size 16 (large): Amphenol
800 620
Size 20 (small): Amphenol
800 600
Unused cavities shall be sealed with:
Amphenol 900 021 or 900 020
OR
Connector: Deutsch HD 34 - 24-19 - PN -
059
Terminals: Size 12 (large): Deutsch
0460-204-12141
Size 16 (small): Deutsch
0460-202-16141
Nut: Deutsch 11263-90
Lockwasher:Deutsch 112264
Unused cavities to be sealed with:
Deutsch 114017
Wiring braided until connector, and
attached to strain relief with nylon strap.
Note 5: Connector: Deutsch DTP 06 - 4S
Terminals: Deutsch 0462-203-12141
Unused cavities to be sealed with:
Deutsch 114017
Secondary Lock:
Deutsch WP 4S
Note 6: Connector: AMP 0-963040-3
Terminals: AMP 0-929939-1
Wire seal: AMP 828904-1
Seal Grommet:
Bosch 1280 703 26026
Note 7: - Terminals 84, 85 shall be equipped with a
label with printing:
“ALWAYS INSULATE WIRE”.
- Terminals 84, 85, 86 shall be equipped
with a shrinkable sleeve with a layer of
glue, as in drawing below, and strapped to
the harness with nylon straps to prevent it
from moving.
1: Wire
2: Sleeve
3: Squeezed tight when hot
Note 8: Connector: Deutsch DTP 04 - 2P
Secondary Lock:
Deutsch W2P
Unused cavities to be sealed with:
Deutsch 114017
Plug for note 3
Note 9: Connector: Deutsch DT06-2S
Terminals: 1062-16-0144
Wedge: W2SA
Note 10:Wire insulation should be resistant to oil,
diesel fuel and coolant.
12
3