- 112 -
Note 11:
Connector according to DIN 72585 4 pins
Connector: G&H 17984.000.002
Terminals: G&H 26570.201.184
Wire seal: G&H 14414.627.626
Unused cavities to be sealed with:
G&H 14416.627.646
Strain relief of fuel level:
G&H 14830.625.699
Wiring braided until connector, and
attached to strain relief with nylon strap.
Note 12:Connector: Deutsch DT04-2P
Wedge: W2PA
Unused cavities to be plugged with
Deutsch 114017
Plug for note 9
Note 16:Insert: Tyco 2-1103113-3
(HN.D.64.Bu.C)
Harting 09 21 064 3101
Socket: Tyco 2-1105051-1 (0.5mm²)
Harting 09 15 000 6203
Socket: Tyco 3-1105051-1 (1mm²)
Harting 09 15 000 6202
Socket: Tyco 4-1105051-1 (1.5mm²)
Harting 09 15 000 6201
Socket: Tyco 5-1105051-1 (2.5mm²)
Harting 09 15 000 6206
Hood: Tyco 0-1106465-5
(HB.24.STS-GR.1.M32.G)
Harting 19 30 024 1542
Metal cable gland M32/IP68 mounted over
100 mm shrinkable sleeve.
Hood entry at row 16.
Note 19:Braiding end at connector fitted with label
See drawing for text
Note 20:Wire harness shall be provided with a
marking label with AC part number and
edition
Note 21:Scan test to be performed on every
conductor
Note 22:Marking to be printed on each end of all
wires
Note 23:All plugs seen from wire connecting side
Note 24:Wire harness finishing: black braiding,
unless stated otherwise
Note 25:Diodes positioned as on drawing
Note 26:Terminal and shrinkable sleeve to be
mounted as in drawing
Wire number printed on shrinkable sleeve
1: Braiding
2: Insulated wires
3: Terminal
4: Non-insulated wires
5: Sleeve
Note 26.1: shrinkable sleeve color = red
Note 26.2: shrinkable sleeve color = blue
Note 27:All wire type H05V-K/H07V-K according
to AC standard 0995 2000 00 unless
specified otherwise
Note 28:Label indicating AC part. Nr. and edition,
testing and/or production date, supplier
reference
Black text on white background
To Next Page
Loading...
