- 17 -
2.4.2 Inverter / battery charger
Power electronics that combines inverter and charger.
It is needed to transform the energy supply from
batteries (DC) to the loads (AC) with or without
additional sources as diesel generators or grid. They
can provide to the consumer double of their nominal
power during short period (seconds) thanks to its
overload capability, enabling the start of inductive
loads as electric motors.
2.4.3 Control and power cubicle
The control cubicle grouping the ESS controller
(from now on CCGX (Color Control GX)), fuses,
automatic switches sockets, etc., is accessible by
opening the door at the front.
Q23 .....Breaker 32A 4P 30mA
Q22 .....Breaker 63A 4P
Q21 .....Breaker 125A 4P
X30 .....Remote start connector
F23 ......Fuse 30A Gpv
F22 ......Fuse 30A Gpv
F21 ......Fuse 30A Gpv
X22 .....Female socket 63A 4P
X23 .....Female socket 32A 4P
X21 .....Female socket 125A 4P
A1 .......CCGX
R10......Potentiometer
Q24 .....Breaker 16A 2P 30mA
Q25 .....Breaker 16A 2P 30mA
Q2 .......Breaker 16A 2P
Q1 .......Breaker 100A 4P
X3 .......Socket 16A 1P+N male (optional in
ZBE)
X24 .....Female socket 16A 2P
X25 .....Female socket 16A 2P
X2 .......Socket 125A 3P+N male
X25
X24
X2
X3
X30
F23
F22
F21
X22
X23
X21
Q1
Q2
Q25
Q24
A1
R10
Q21
Q22
Q23
00_00_ZBP45_EN.book Page 17 Monday, October 19, 2020 9:52 AM
To Next Page
Loading...