- 25 -
3.4.4 Connecting the load
3.4.4.1 Protection
– Check whether frequency, voltage and current
comply with the ratings of the ESS.
3.4.4.2 Connecting the load
Connect the load to the respective socket or
powerlocks considering the rating of the socket and
the appliance.
For safety reasons, it is necessary to
provide an isolating switch or
circuit breaker in each load circuit.
Local legislation may impose the use
of isolating devices which can be
locked.
00_00_ZBP45_EN.book Page 25 Monday, October 19, 2020 9:52 AM
To Next Page
Loading...