- 22 -
3.2.2 Transportation and positioning
of the ESS onto vehicles
Due to its compact and optimized design, the ESS
offers a great transport efficiency.
The ESS can be easily lifted and moved to difficult
areas thanks to its central lifting eye and double
forklift pockets in its frame. All that is needed is a
forklift truck or a mechanical arm.
The forklift pockets and the lifting eye can also be
used to place the ESS onto trucks for road
transportation. For safe transport of the ESS on trucks
or similar vehicles:
1. Ensure that the machine is stable and secure.
2. Check that the ESS is placed perfectly horizontal-
ly (check the levels on top of the unit).
3. To ensure stability, use the fork lift slots (1) and
marked roof guides (2) to fix the ESS to the
transport vehicle.
4. Use slinges or other means of anchoring, provided
that these do not affect the machine's safe trans-
portation and integrity.
5. It is recommended that the machine is covered by
a tarpaulin to protect it against bad weather
conditions if it is transported on an open truck.
Schematic overview:
Guide the slinges carefully through
the marked roof guides at both sides
of the lifting beam to avoid that the
canopy gets damaged.
Transport of one single unit:
Transport of 2 units in parallel:
00_00_ZBP45_EN.book Page 22 Monday, October 19, 2020 9:52 AM
To Next Page
Loading...