- 67 -
9.3 Overview of the mechanical
options
– Special colour canopy
– Trailer
9.4 Mechanical options
9.4.1 Special colour canopy
This option allows you to select a specific colour for
the whole external parts of the canopy. Contact your
Atlas Copco dealer for available configurations.
9.4.2 Trailer
The ESS can be optionally provided with an on-road
trailer equipped with an adjustable towbar with
brakes, with DIN-eye, NATO-eye, AFR-eye or ball
coupling and with road signalisation which is
approved by EC legislation.
When using this option:
– Make sure that the towing equipment of the
vehicle matches the towing eye before towing the
ESS.
– Never move the ESS while electrical cables are
connected to the unit.
– Always apply the hand brake when parking the
ESS.
– Leave enough space for operation, inspection and
maintenance (at least 1 meter at each side).
To maintain the undercarriage:
– Check the tightness of the towbar bolts, the axle
bolts and the wheel nuts at least twice a year and
after the initial 50 hours of operation.
– Grease the wheel axle suspension bearings, the
drawbar to the steering gear shaft and the spindle
of the brake handle at least twice a year. Use ball
bearing grease for the wheel bearings and graphite
grease for the drawbar and spindle.
– Check the brake system twice a year.
– Check the condition of the vibration dampers
twice a year.
– Repack the wheel hub bearings once a year using
grease.
– Wheel chocks allows to park the ESS on sloping
ground. Place wheel chocks in front of or behind
the wheels to immobilize the ESS.
00_00_ZBP45_EN.book Page 67 Monday, October 19, 2020 9:52 AM
To Next Page
Loading...