- 63 -
9 Options
9.1 Overview of the electrical
options
– Modem GSM 3G - GPS
– WIFI USB stick
– MPPT Solar charger + MC4 PV connectors
– Sockets configuration
– PowerLock connectors
– ELP sockets
– Cold weather
9.2 Electrical options
9.2.1 Modem GSM 3G - GPS
This modem GSM 3G-GPS is connected to the
display USB port. This modem allows internet
connection for remote monitoring and control
through the VRM Portal. Thanks to GPS, location and
speed will be visible on the display, and the data is
sent to the VRM Portal for tracking purposes. The
map on VRM will show the latest position.
The remote monitoring website (VRM) can display
all the systems data in a comprehensive graphical
format. System settings can be changed via the portal.
Alarms can be received by e-mail.
Use a GPS to track remote vehicles and, optionally,
get an alarm when they leave a designated area
(geofencing). It is also possible to download a gps-
tracks.kml file which can be opened with Navlink and
Google Earth for example.
It can communicate at both 4800 and 38400 baud
rates. Plug the unit into either of the two USB
sockets… connection may take a few minutes, but the
CCGX will automatically recognize the GPS. The
unit's location will automatically be sent to the VRM
online portal and its position shown on the map.
9.2.2 WIFI USB stick
This WIFI USB stick can be connected to the display
USB port. This allows internet connection via WIFI
for remote monitoring and control through the VRM
Portal.
The remote monitoring website (VRM) can display
all the systems data in a comprehensive graphical
format. System settings can be changed via the portal.
Alarms can be received by e-mail.
Using a Wi-Fi dongle it is possible to connect to
WEP, WPA and WPA2 secured networks.
Although other Wi-Fi dongles may work, they have
not been tested and we do not offer support for other
dongles.
The Wi-Fi menu shows the available networks. When
a network is selected, it is possible to fill in the
password (if the password is not already known) to
connect to the network. Setting up via WPS (Wi-Fi
Protected Setup) is not supported.
When the CCGX finds multiple Wi-Fi networks of
which the password is known, the strongest network
is selected automatically. When the signal of the
connected network becomes too weak, it will
automatically switch to a stronger network - if it
knows the password of that network.
00_00_ZBP45_EN.book Page 63 Monday, October 19, 2020 9:52 AM
To Next Page
Loading...