- 65 -
* CEE, RIM and PIM available
9.2.5 PowerLock connectors
PowerLock connectors are plastic bodied single pole
electrical connectors withstanding 600 Amps nominal
intensity.
They are moisture and impact resistant and feature
insulated contact tips to prevent accidental touching
of electrically live parts.
They are easy to terminate to copper cable using
either industry standard crimp tools or set-screw
contacts.
The high impact plastic connector bodies are keyed to
prevent connection errors, and colour coded to ensure
correct mating and suit 3 phase electrical systems that
are used in Europe.
Secure coupling of a connector pair is through a
bayonet lock together with a secondary locking pin.
The secondary lock engages when the bayonet lock is
fully turned and disconnection requires a simple
release key. The secondary lock discourages
tampering and reduces the risk of accidental or
unauthorized disconnection.
All connectors are IP2X finger protected and
environmentally sealed to IP67.
9.2.6 ELP sockets
The option provides a individual earth leakage
protection per socket that will trip the respective
socket breaker when an earth fault current is detected.
The different individual earth leakage protections are
summed up in the table below:
ZBP45 ZBE45
OP1 OP2 OP3 OP1 OP2
IN CEE 400V 5P 125A 1 - 1 - -
POWER LOCKS - 1 - - -
CEE 400V 5P 63A - - - 1 -
CEE 400V 5P 32A - - - - 1
CEE 230V 3P 16A 11111
OUT CEE 400V 5P 125A 1 - 1 1 -
CEE 400V 5P 63A 11111
CEE 400V 5P 32A 1 1 - 1 1
POWER LOCKS - 1 - - -
CEE 230V 3P 63A - - 3 - -
*230V 3P 16A 2 2 - 2 2
00_00_ZBP45_EN.book Page 65 Monday, October 19, 2020 9:52 AM
To Next Page
Loading...