- 28 -
4.2.5 Stopping the ESS
Follow the instructions below to switch the ESS off
correctly:
1. Place all the automatic switches in their OFF
position.
2. Turn the selector mode switch to OFF position.
4.3 Operating the CCGX
controller
The ESS controller Color Control GX (CCGX) sits at
the heart of your energy installation. All the other
system-components - such as inverter/chargers, solar
chargers, and batteries - are connected to it. The
CCGX ensures that they all work in harmony.
Monitoring can be done either with the CCGX in
front of you - or from anywhere in the world using an
internet connection and the VRM Website.
The CCGX also provides Remote firmware updates
and even allows the settings to be Changed Remotely.
Your device will update itself to the latest version
automatically.
4.3.1 Push buttons and display
Should an emergency arise, it is also
possible to stop the machine by
pressing the EMERGENCY 'STOP'
button. If the ESS has been stopped
in this way, the emergency stop
button must be released by rotating
it clockwise, for next operation.
1 Status of the inverter/charger.
2 AC source total power and splitted by phase
(here: mains).
3 Display of battery State of charge (SoC) and
charging/discharging values (power, voltage
and intensity).
4 Switches between the three different system
displays. If you are in the menu, press this
button to exit.
5 Select the highlighted (blue background)
point.
Note: The button can be used by other
menu-specific functions. This can be
displayed with a corresponding label in the
display above the button.
00_00_ZBP45_EN.book Page 28 Monday, October 19, 2020 9:52 AM
To Next Page
Loading...