- 35 -
ZBE45
ZBP45
Yellow values are only possible with the 63 A socket, not with 32 A inlet socket.
Note
Values above 63 A are only allowed with ZBP45.
ZBE45 highest value is 32 or 63 A depending on the
inlet socket configuration.
You can determine intermediate values by
interpolation.
Minimum input current limit values
When PowerAssist is enabled in VEConfigure, there
is a minimum input current limit. The actual limit
differs for each model. It is 14,5 A for ZBP45 and
3,9 A for ZBE45.
After setting the input current to a value below the
limit, it will automatically be increased again to the
limit.
Note that it is still possible to set the input current
limit to 0. When set to 0, the system will be in
passthrough (charger disabled).
Genset Nominal power Max Intensity considering PF
kVA PF= 0,8 PF= 0,9 PF= 1
18 26,0 23,1 20,8
20 28,9 25,7 23,1
30 43,4 38,5 34,7
40 57,8 51,4 46,2
45 63,0 57,8 52,0
55 63,0 63,0 63,0
60 63,0 63,0 63,0
80 63,0 63,0 63,0
Genset Nominal power Max Intensity considering PF
kVA PF= 0,8 PF= 0,9 PF= 1
40 57,8 51,4 46,2
45 65,0 57,8 52,0
55 79,5 70,6 63,6
60 86,7 77,1 69,4
80 100,0 100,0 92,5
100 100,0 100,0 100,0
120 100,0 100,0 100,0
00_00_ZBP45_EN.book Page 35 Monday, October 19, 2020 9:52 AM
To Next Page
Loading...