- 41 -
Manual Start Feature
Use the Manual start feature to remotely start the
generator. You can also press Start when the
generator is already running - doing so will ensure
that the generator won't automatically stop when the
condition which caused it to start has been satisfied.
In other words, the Manual start feature will override
the auto-stop parameters.
There are two ways to start the generator manually:
– Using the Manual start menu: In Generator start
and stop go to Manual start; and then toggle the
graphic to start the generator.
– Using the GX 'Home page' Generator graphic:
Press the top-left button on the CCGX and engage
the Generator page. Then press the center button.
You must first choose how you wish to stop the
generator - manually, or by entering a run-time.
Once you've made your selection a five-second
countdown will begin during which you can abort
the manual-start by pressing the center button.
The stop timer is available to both methods of
manually remote-starting the generator, and using it
will ensure that the generator will auto-stop and will
not be inadvertently forgotten.
Note that stopping the generator manually can only be
achieved when no un-met ‘run’ condition is active. If
you wish to force a generator-stop you must first
disable the function which is keeping it running - or
disable the Generator start and stop function.
If the generator is started manually
(remotely) without using the stop
timer, it will run until the 'Off'
button has also been manually
toggled.
00_00_ZBP45_EN.book Page 41 Monday, October 19, 2020 9:52 AM
To Next Page
Loading...