8
Turning ON power to the Ninja V
The start button is located on the top right hand side of the unit (as you
look at the screen). With a charged battery attached momentarily press
the recessed circular button on the top right side of the Ninja V as you
look at the screen to power up the unit. After a couple of seconds you will
see the Atomos logo, and then the Ninja V Home Screen.
Turning OFF power to the Ninja V
To turn the unit off, touch the battery icon on the top right of the home
screen, and then press the green Power icon for 4 seconds.
The icon will go red when touched to indicate activation of the button.
The unit will then power off. You can also do a forced power down by
pressing the on/off button for four seconds.
Four seconds can seem like a long time! We’ve made it this
way to make absolutely certain that the Ninja V can’t be turned
off accidentally.
Do not press and hold the power button in on the Ninja V while the unit
is off. This will place the device in to a Firmware recovery mode. If you
accidentally do this, simply turn the device off again or remove the
power source.
Take note to respect the air ow and do not to obstruct the cooling
vents of the unit.
Battery - Menu Screen
On
+ forced
power down
Tally Light
Flashes red when recording
Fan ventilation
Power down
Release
button
4. Powering the Ninja V
To Next Page
Loading...
Need help?
General
