Atomos NinjaV - Battery Info

Atomos Ninja V – User Manual Edition 1: November 2018
24
Info
Showsthesoftware(rmware)versionanduniquedevice
ID (DID) of your Ninja V device. This will be required to
activate the Avid DNxHD / Avid DNxHR codec. You can
also check on the Atomos website to ensure you are
runningthelatestrmware:www.atomos.com/support
Info
Battery
The Battery icon on the left of the screen indicates the
remaining power in the attached battery.
In the center of the screen is a ‘power down’ button.
Hold down for 4 seconds to shut down the unit.
When using the supplied Battery Eliminator, the
remaining power indicator will remain green and show
100% full. The displayed voltage will be determined by
the input source. Refer to your Ninja V quickstart guide
for more information regarding battery life.
When a battery is running low the battery icon in
the upper right corner of the screen will ash and
warning menus will appear at 25% and 10%.
Battery
7. Using the Ninja V