46
Tape Return Channel Path
3 PLAY A is the signal coming directly from the
playback device.
4 TAPE IN Where the signal enters the desk ready
to be mixed to the stereo bus.
5 SEND/RETURN The sends and returns allow you
to insert outboard gear into the Tape Return path.
6 DEV OUT Stands for device out and allows you
to route the signal directly from the Line Input.
7 LINE IN Where the signal enters the desk to the
Line Inputs for either tracking or mixing.
8 SEND/RETURN The Sends and returns allow you
to insert outboard gear into the Mic/Line Input.
The Tape Return path is the signal coming back
from either your DAW or tape machine.
The Channel Path, is the signal coming from the
microphones and instruments into the desk.
3 5 6 4 7 8
To Next Page
Loading...
