Hardware Installation Manual 20 Document #: LTRT-10229
Mediant 800 MSBR
3.2.2.4 WAN LEDs
3.2.2.4.1 GE WAN LED
The WAN GE port provides a LED for indicating operating status, as described in the table
below.
Table 3-6: GE WAN LED Description
LED
Color
LED
State
Description
Green
On WAN link established.
Flashing Data is being received or transmitted.
-
Off No WAN link.
- Off No power received by the device.
3.2.2.4.2 E1/T1 WAN LED
The E1/T1 WAN port provides a LED for indicating operating status, as described in the
table below.
Table 3-7: E1/T1 WAN LED Description
LED
Color
LED
State
Description
Green
On Link up.
Flashing Connection in progress.
-
Off No link.
3.2.2.4.3 SHDSL WAN LED
The SHDSL WAN port provides a LED for indicating operating status, as described in the
table below.
Table 3-8: SHDSL WAN LED Description
LED
Color
LED
State
Description
Green
On At least one of the links is synchronized.
Fast
Flashing
At least one of the links is initializing.
Slow
Flashing
SHDSL firmware is running.
-
Off No WAN link or no power received by the device.
To Next Page
Loading...
