Configuration Note 5. Configuring the E-SBC Device
Version 1.0 Issue 1.0 57 October 2011
5.9 Step 10: Configure Number Manipulation
The Manipulation Tables submenu allows you to configure number manipulation and
mapping of NPI/TON to SIP messages. This submenu includes the following options:
Dest Number IP->Tel. See Section 5.9.1 on page 58.
Des
t Number Tel->IP. See Section 5.9.1 on page 58.
Source Numb
er IP->Tel. See Section 5.9.2 on pag
e 60.
Source Number Tel->IP. See Section 5.9.2 on pag
e 60.