AUTOFLAME MK8 User Manual

11
Errors & Lockouts
Flame Safeguard (MM80001/FSG) Manual
Page | 136
Error
Message
Description
52
Fused 13.5V Supply Error (Check
F3)
Internal fault
• Check IR scanner wiring on terminals 29, 30, 48, 49 and oil pressure sensor on 48, 49
• Check fuse 3 (500mA)
53
Air Pressure Zeroing Fault
Commissioned air zero pressure is more than 5mbar from
sensor’s zero value
• Check air pressure sensor value during VPS
54
Software error
Internal fault
• Contact Autoflame approved local Tech Centre
55
Software error
Internal fault
• Contact Autoflame approved local Tech Centre
56
Software error
Internal fault
• Contact Autoflame approved local Tech Centre
57
Software error
Internal fault
• Contact Autoflame approved local Tech Centre
58
Software error
Internal fault
• Contact Autoflame approved local Tech Centre
59
Software error
Internal fault
• Contact Autoflame approved local Tech Centre
60
Software error
Internal fault
• Contact Autoflame approved local Tech Centre
61
Software error
Internal fault
• Contact Autoflame approved local Tech Centre
62
Software error
Internal fault
• Contact Autoflame approved local Tech Centre
63
Software error
Internal fault
• Contact Autoflame approved local Tech Centre
64
ADC Reference Voltage Error
Hardware fault
• Contact Autoflame approved local Tech Centre
65
Software error
Internal fault
• Contact Autoflame approved local Tech Centre
66
Software error
Internal fault
• Contact Autoflame approved local Tech Centre
67
Software error
Internal fault
• Contact Autoflame approved local Tech Centre

AUTOFLAME MK8 Specifications

General

Brand	AUTOFLAME
Model	MK8
Category	Controller
Language	English